Raximo Alloy Handlebar New Generation
for Model: Ducati Scrambler 800 Desert Sled KE 2017
The Raximo New Generation handlebars have been designed to offer higher torsional rigidity for newer motorcycle models. Available in 8 attractive colors with a thicker material (Ø 28,6 mm) for the Tightening and a width of 800 mm, available in 8 attractive colors. it improves a better drive on many models.
The High torsional rigidity is also obtained with a material thickness of 5 mm
To increase safety against twisting of the handle, the left side of the handlebar is ribbed.
Models are included in the ABE for which the TÜV and us have not only tested the material and design of the handlebar, but also the cable lengths and the specifications of the new handlebar. With the original parts, which is a guarantee of security.
Handlebars that meet this requirement of the TÜV will be displayed after vehicle selection above the basket button in a green field (specific model).
The handlebar is also available as a universal handlebar but must then be accepted and registered by the German TÜV.
If the new handlebars are extended or if the angles are changed, the cables or wires may be too short and need to be retrofitted at a accessories dealer.
Before ordering a preliminary check can be made. For this, the distance between the center of the handlebar and the right edge of the handlebar have to be measured.
If the diagonal measurement does not change significantly the size of our handlebars, it is likely mean that not much will be changed on the cables and pipes.
Technical details:
- High strength aluminum handlebar
- Ø 28,6mm for tightening and 22mm outside
- Perfect fit thanks to the laser engraved scale
Dimensions:
- Width: 800mm
- Height: 120mm
- rear offset : 75mm
- Exterior diameter for tightening: 28,6mm
- Exterior diameter for handles: 22mm
- Inner diameter: about 12.5 mm
The handlebars are delivered with an ABE (German TÜV), no registration in the vehicle documents is required if the model is in the ABE vehicle list.
If your vehicle is not listed in the ABE, you can still mount the handlebars accordance the § 19.2 StVZO (German Road Regulations) at your TÜV control center in your area and get it registered it in the vehicle documents.
Content:
1 x Raximo Handlebar "New Generation"
1 x TÜV Document
Der New Generation Lenker von Raximo wurde für höhere Verwindungssteifheit bei neueren Motoradmodellen entwickelt. Mit dickerem Material (28,6 mm Ø) im Bereich der Klemmung und 800 mm Breite verbessert er bei vielen Modellen das Fahrgefühl und ist in 8 attraktiven Farben erhältlich.
Die hohe Verwindungssteifigkeit wird auch durch 5mm Materialstärke erreicht. Für eine hohe Verdrehsicherheit des Griffes ist die linke Seite des Lenkers geriffelt.
In der ABE enthalten sind Modelle, bei denen wir und der TÜV nicht nur das Material und die Ausführung des Lenkers an sich geprüft haben, sondern auch die Leitungslängen und Züge mit dem neuen Lenker. Mit Originalteilen ist hier eine Verbau Sicherheit gegeben. Lenker die diese Anforderung mit ABE erfüllen, werden euch nach der Fahrzeugauswahl angezeigt und über dem Warenkorb Button mit einem Grünen Feld (modespezifischer Artikel).
