2 Universal - RFY - Gas Pressure Dampers With Expansion Reservoir
Works as a replacement for motorcycle suspension struts
- Made of casted aluminium and anodized aluminium
- Color: black/gold - black spring
- Expansion reservoir filled with nitrogen
- Spring preload can be adjusted continuously
- Strength of the spring: approx. 8 mm
- Progressively coiled spring
- Length eyelet center to eyelet center 340 mm
- Full length approx. 370 mm
- Length extendable by approx. 15 mm ( by unscrewing the lower fender strut eyelet )
- Lower fender strut eyelet is screwed into the damper case by approx. 24 mm
- The sleeves of the eyelets are detachable and have a diameter of approx. 12 mm
Included:
- 2 eyelet sleeves with 10 mm diameter
- 2 hook wrenches
More sleeves 10 mm, 12 mm and 14 mm can be found at our online shop
Consider the space you need by the expansion reservoir and the original length before the installation
No road approval - only for shows and races
Motorcycle suspension struts are a combination of a coil spring and a hydraulically acting damper
(vibration damper).
Suspension struts are one of these parts, that affect the handling and
contribute to the granting of the vehicle type approval
The switch of the original coil spring with another one like for example a progressive instead of
a linear spring rate as well as the exchange of the whole suspension strut is subject to approval
Changes to the vibration damper or the exchange of it is not subject to approval.
This means :
If the original spring gets adapted- the damper is not subject to approval.