
RAXIMO "BCS"
CNC milled aluminium brake lever and clutch lever set
- with ABE (TÜV)
- in the short version
- length approx. 15cm
- 81 possible colour combinations
- 6-fold adjustable distance to the handlebars

RAXIMO "BCE"
CNC milled aluminium brake lever and clutch lever set
- with ABE (TÜV)
- Length adjustable by means of dovetail connection
- adjustable length from 16cm-19cm
- 729 possible colour combinations
- 6-fold adjustable distance to the handlebars

RAXIMO "BCF"
CNC milled aluminium brake lever and clutch lever set
- with ABE (TÜV)
- length adjustable and foldable version
- length 16cm-19cm
- 6561 different colour combinations
- 6-fold adjustable distance to the handlebars
MTP-Racing Lever Guards TÜV approved for many motorbike models

Lever Guard right
Lever Guard / Brake Lever Protector right side
- with ABE (TÜV)
- adjustable in length
- adjustable in angle
- 729 possible colour combinations

Lever Guard Set
Lever Guard / Lever Protector Set
- with ABE (TÜV)
- adjustable in length
- adjustable in angle
- 729 possible colour combinations
MTP-Racing handlebar end mirror with E-number

Handlebar end BEM-V2
RAXIMO handlebar end mirror BEM-V2
- with E-number
- CNC milled aluminium
- angle of mirror arm adjustable
- easy mounting
- incl. adapter for handlebar inner diameter 14 - 18 mm (further adapters available separately)

Handlebar end BEM-V1
RAXIMO handlebar end mirror BEM-V1
- with E-number
- CNC milled aluminium
- extra wide adjustable angle of the mirror arm
- easy mounting
- incl. adapter for handlebar inner diameter 14 - 18 mm (further adapters available separately)
- mountable with lever guards or end caps in nine available colours
MTP-Racing handlebar risers TÜV approved

Riser "Classic"
Handlebar riser "Classic
- with ABE (General Operating Permit)
- for handlebar diameters of 22 mm, 28.6 mm and 32 mm
- and raises of 20 mm, 30 mm, 40 mm and 50 mm

Riser "Offset"
Handlebar riser "Offset
- with ABE (General Operating Permit)
- with offset
- Raise: 30 mm
- Offset: 20 mm
- for handlebar diameters of 22 mm and 28.6 mm

Riser "Vario"
Handlebar riser "Vario
- with ABE (General Operating Permit)
- very variable adjustable
- Raise from 55 - 60 mm
- for handlebar diameters of 22 mm, 28.6 mm, 1 inch (25.4 mm) and 32 mm

Conversion kit oversize handlebar
Adapter for handlebar conversions
- for conversion to the stable, conical handlebars
- Conversion from 22 mm to 28.6 mm handlebar diameter
- with ABE (General Operating License)
- Increase from 20 mm

Riser Set "Booster"
Raximo Riser Set "Booster
- aluminium CNC milled and black/orange anodised
- for handlebars with 22 mm, 25 mm & 28 mm diameter
- Increase by means of distance bushings from 20–80 mm variably adjustable
- incl. ABE (TÜV approved, no registration in the papers necessary)

Riser Set "Offset Booster"
Raximo Riser Set "Booster
- aluminium CNC milled and black/orange anodised
- Offset to the rear (offset) 12 mm, can of course also be rotated by 180 degrees if required
- for handlebars with 22 mm, 25 mm & 28 mm diameter
- Increase by means of distance bushings from 20–80 mm variably adjustable
- incl. ABE (TÜV approved, no registration in the papers necessary)

Handlebar "Street"
Aluminium handlebar "Street"
- high-strength aluminium handlebar with ABE (General Operating Permit)
- in eight different colours
- 22 mm diameter
- 730 mm width

Handlebar "Tour"
Aluminium handlebar "Tour"
- high-strength aluminium handlebar with ABE (General Operating Permit)
- in eight different colours
- 22 mm diameter
- 810 mm width

Handlebar "New Generation"
Aluminium handlebar "New Generation" - conical
- high-strength aluminium handlebar with ABE (General Operating Permit)
- in eight different colours
- 28.6 mm diameter
- 800 mm width

Dragbar
Aluminium handlebar Dragbar 22 mm/ 1 inch/ 28,6 mm
- with ABE (National Type Approval)
- Available with or without perforation for internal cable routing
- available in four colours

Clip-On Handlebar
Clip-On Handlebar Sets
- with ABE (National Type Approval)
- Clamps available from 32–58 mm diameter
- Handlebar tubes 22 mm, cranked and 1 inch in 5 colours

Bobbins
Raximo stand mountings/Bobbins
- Stand mount for assembly stand
- Sizes: M6, M8, M10x1,25 and M10x1,5
- available in black, titanium, silver, gold, orange, red, pink, blue and green

Handlebar grips
CNC machined aluminium handlebar grips with rubber grip from Raximo
- fits all 22 mm handlebars
- one side is bigger, for throttle grip sleeve
- available in black, titanium, silver, gold, orange, red, pink, blue and green

Cover
Raximo brake fluid reservoir cover
- CNC machined from aluminium
- easy replacement instead of the original
- available for many models
- in different colours

Valve caps
CNC machined aluminium valve caps from Raximo
- Weight 5,5 gram per valve cap
- width 11 mm / height 12 mm
- available in black, titanium, silver, gold, orange, red, pink, blue and green