Dragbar 22mm
Dragbar 1 Inch
Dragbar 28,6mm
Dragbar 22mm
Dragbar 1 Inch
Dragbar 28,6mm

RAXIMO Alu Dragbar 22mm, 1 inch & conical 28.6mm

The extra flat Drag Bar handlebar from Raximo is ideal for conversions for choppers, cruisers and naked bikes and gives your motorbike the individual Drag Star character.

  • High-strength tubular aluminium handlebar
  • Scaling for easy alignment at the handlebar clamp
  • With holes in the handlebars for individual internal routing of the cables from the handlebar fittings.

Our handlebars are delivered with a German ABE (General Operating Permit), an entry in the vehicle documents is not necessary. If your vehicle is not listed in the ABE, you can have the handlebars approved in accordance with §19.2 of the German Road Traffic Licensing Regulations (StVZO) at your responsible TÜV test centre and have them entered in the vehicle documents.

Dragbar 22mm

RAXIMO Dragbar 22 Maße

Dimensions:

  • Width: 800 mm
  • Height: 96 mm
  • Outer diameter in the area of the clamp: 22.2 mm
  • Outer diameter in the area of the handles: 22.2 mm
  • Inner diameter: approx. 12 mm
  • Width approx. at attachment: 210 mm

Please note, most fittings have a locking pin in the switch unit, a hole is not present in the handlebar, this still needs to be drilled yourself, we have 4mm and 5mm handlebar drilling templates available if required.

Dragbar 1 Inch

RAXIMO Dragbar 1 Zoll Maße

Dimensions:

  • Width: 850 mm
  • Height: 99 mm
  • Outer diameter in the area of the clamp: 1 inch / 25.4 mm
  • Outer diameter in the area of the handles: 1 inch / 25.4 mm
  • Inner diameter: approx. 15 mm
  • Width approx. at mounting: 220mm

Dragbar conical 28.6mm

RAXIMO Dragbar konisch Maße


Dimensions:

  • Width: 825 mm
  • Offset to the rear: 100 mm
  • Outer diameter in the clamping area: 28.6 mm
  • Outer diameter in the area of the grips: 22.2 mm
  • Inner diameter: approx. 12 mm
  • Width approx. at attachment: 220 mm

The holes on the outside and in the middle of the handlebars are for individual routing of the armature wiring. Please note, most fittings have a locking pin in the switch unit, a hole is not present in the handlebar, this must still be drilled yourself, we have 4mm and 5mm handlebar drilling templates on request in the offer.

Scope of delivery:

1 x Raximo handlebar "flat Drag Bar".
1 x General operating permit

Here you will find a model list of available RAXIMO Dragbar handlebars with 22mm, click on your make and model

 

Here you will find a model list of available RAXIMO Dragbar handlebars with 25.4mm / 1 " inch Click on your brand and model

 

Here you will find a model list of available RAXIMO Dragbar handlebars conical with 28.6mm, click on your brand and model