high quality heated grips universal
for Model: Yamaha DT 250 MX 1R7 1977-1982
Cold hands when driving? Does not have to be.
By using our price-performance winners, your hands are warmed when driving in colder temperatures.
3 levels (off, one and two) with toggle switch allow the targeted control. ?
Built-in throttle tube, therefore no twisting of the heating supply line
2-stage heating output
Handle length: 120 mm
Outside diameter: 35 mm
Material: plastic / rubber
Technical specifications
Power consumption:
Level 1 - approx. 25W approx. 40 ° C
Level 2 - approx. 35W approx. 60 ° C
Power consumption:
Level 1 - approx. 2A
Level 2 - approx. 3A
Note:
• Operating voltage 12V
• Battery capacity of at least 6Ah recommended
Top system, with throttle tube!
The original throttle tube is omitted and is replaced with the included throttle. So there are no disturbing ones
Cable to accelerate.
There are matching plastic handlebar ends, but the originals can also be kept.
can be used for all 22mm handlebars!
Scope of delivery:
- Heated grip unit - left
- Heated grip unit - right
- chrome-plated handlebar end caps
- Plastic ring for left handle unit
- Plastic ring with outer bars
- for right handle unit
- Handlebar end adapter with external thread
- Plastic ring with recess for the gas component pull for the right side
- Plastic ring for right side
- Allen key
- Fuse holder with 10A with plug-in fuse
- Branch connector
- printed instructions DE / EN