Your vehicle: Husqvarna FE 501 2022

Engine Displacement: 501 ccm
Cylinder: 1
Oil capacity (incl. filter): 1.2 Litres
Viscosity: SAE10W-50
Oil classification: API SH JASO MA2
Front tyre: 90/90-21 54M
Rear tyre: 100/100-18 60M

Find your bike via manufacturer/year of manufacture/model:

or via the quick selection:

Show articles for your model

Model-dependent product

Handlebar Grips Made of Rubber Motocross/ Dirtbike for model: Husqvarna FE 501 2022

Handlebar Grips Made of Rubber Motocross/ Dirtbike for Husqvarna FE 501 2022

SKU: MTP16162-991402
Category: Handle Bar Grips
Manufacturers: MTP-Racing

Colour

6,90 €

incl. 19% VAT , plus

Available immediately

Model-dependent product

Suitable for your selected model: Husqvarna FE 501 2022

This item has variations. Please select the requested variation.

Description
Reviews

Handlebar Grips for Enduro, Cross and Road for model: Husqvarna FE 501 2022

Suitable for all 22 mm handlebars
and conical tapered handlebars with 22 mm bar ends
1 grip made of rubber for the left handlebar side with a diameter of 22 mm
And 1 grip with a diameter of 25 mm for the throttle tube
Closed ends
Vibration- and
Slip-resistant rubber
Diamond pattern for a comfortable grip and great contact
Waffle tread with recesses to fix the attachment wire
Length 115 mm
Delivered as a pair

Can easily replace the original grips.

Tips for the disassembly and the attachment:

Lift the old grip with a screw driver at multiple spots and spray some brake cleaner into the slot.
Remove the screw driver and move the grip with your hand, afterwards pull it off with circular motions.
Spray some brake cleaner on the new grip and the handlebar before sliding it on.
This allows you to easily slide on the new grip and turn it to the desired position.
(Position the rectangles with the recesses facing to the front so that you have a great grip when you rest your hands on the handlebar and
the rectangles don't push into the ball of your hand. The rectangles provide a safe grip when you accelerate)
The brake cleaner evaporates after a few minutes and the grip sits extremely tight and secure.

For enduros, there are often used wrapped wires to prevent the grips from turning.
3 wire wraps can be easily attached to these grips. 2 to the grip area and 1 in front of the hand guard.
The twisted wire can be pushed into the smal square-shaped recess to protect the gloves from damage.